Vehicle Signal Boosters
Keep HearClear PTT radios and smartphones connected on rural roads, job sites, and long hauls.
Stay Connected on the Road
Metal vehicle bodies and rural highways both weaken cellular signal. A vehicle booster mounts an antenna outside, amplifies the signal, and rebroadcasts it inside the cab, so every radio and phone on board gets a stronger connection.
- Executive protection vehicles
- Private security patrol vehicles
- Service vans and work trucks
- Utility and emergency response vehicles
- Ag, ready mix, and construction fleets
- Over-the-road trucks and long-haul drivers
Works with HearClear PTT
Your drivers' HearClear PTT radios run on the same cellular networks as their phones. A booster in the vehicle helps keep push-to-talk calls clear in the fringe areas between towers.
Vehicle Boosters
Fusion2Go Ultra
High-power booster for cars, trucks, vans, and SUVs, with a magnet-mount outside antenna. Boosts every phone, hotspot, and tablet in the vehicle at once.
Specifications for the Fusion2Go Ultra
| Part Number: | SC-Fusion2Go-Ultra |
|---|---|
| Uplink Frequency Range (MHz): | 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 |
| Downlink Frequency Range (MHz): | 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 |
| Supported Standards: | 5G, 4G, LTE cellular standards |
| Cellular Bands: | 12 / 17 / 13 / 5 / 2 / 25 / 4 |
| Maximum Gain: | 50 dB |
| Input Impedance: | 50 Ω |
| Gain Adjustment: | 20 dB (Automatic) |
| Maximum Uplink Power: | 30 dBm |
| DC Power: | 9-15V |
| VSWR: | ≤2.0 |
| Exterior Antenna Cable / Length: | LMR-100 / 12.5 ft |
| Interior Antenna Cable / Length: | 302-series / 10 ft |
| DC Power Supply Cable Length: | 12 ft |
| Exterior Antenna Height: | 3.25 in |
| RF Connectors: | FME Male (both ends) |
| Power Consumption: | ≤15W |
| Operation Temperature: | -4ºF to +158ºF |
| Dimensions: | 8" x 4" x 1.4" |
| Weight: | 2.25 lbs |
| Certification: | FCC ID: RSN-F2GULTRA Contains FCC ID: 2ATPO-PB03 |
Fusion2Go Max
Car booster with SureCall's patented Extended Range Technology (ERT) for better signal on remote roads.
Specifications for the Fusion2Go Max
| Part Number: | SC-Fusion2GoMax |
|---|---|
| Uplink Frequency Range (MHz): | 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included) |
| Downlink Frequency Range (MHz): | 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included) |
| Supported Standards: | CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards |
| Input/Output Impedance: | 50 Ohm |
| Maximum Gain: | 50 dB (all bands) |
| Gain Adjustment: | 20 dB (Automatic) |
| Max Uplink Power: | 29.0 dBm, 1 Watt EIRP |
| Noise Figure: | ≤5 dB |
| VSWR: | ≤2.0 |
| DC Car Charger: | 6-17V |
| Exterior Antenna Cable Type / Length: | SC-302 / 10 ft |
| Interior Antenna Cable Type / Length: | RG-174 / 10 ft |
| DC Power Supply Cable Length: | 12 ft |
| RF Connectors: | FME Male (both ends) |
| Power Consumption: | ≤10W |
| Operation Temperature: | -4ºF to +158ºF |
| Dimensions: | 5.625" x 4" x 1.125" |
| Weight: | 1.43 lbs |
Fusion2Go Ultra Fleet
Fleet version of the Ultra with a permanent rooftop antenna, for work trucks, service vans, utility vehicles, and emergency response vehicles.
Specifications for the Fusion2Go Ultra Fleet
| Part Number: | SC-Fusion2GoUltra-Fleet |
|---|---|
| Uplink Frequency Range (MHz): | 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 |
| Downlink Frequency Range (MHz): | 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 |
| Supported Standards: | 5G, 4G, LTE cellular standards |
| Cellular Bands: | 12 / 17 / 13 / 5 / 2 / 25 / 4 |
| Maximum Gain: | 50 dB |
| Input Impedance: | 50 Ω |
| Gain Adjustment: | 20 dB (Automatic) |
| Maximum Uplink Power: | 30 dBm |
| DC Power: | 9-15V |
| VSWR: | ≤2.0 |
| Exterior Antenna Cable / Length: | RG-58U / 15 ft |
| Interior Antenna Cable / Length: | 302-series / 10 ft |
| 12V Hardwire Power Supply Cable Length: | 18 ft |
| RF Connectors: | FME Male (both ends) |
| Power Consumption: | ≤15W |
| Operation Temperature: | -4ºF to +158ºF |
| Dimensions: | 8" x 4" x 1.4" |
| Weight: | 2.25 lbs |
| Certification: | FCC ID: RSN-F2GULTRA Contains FCC ID: 2ATPO-PB03 |
Fusion2Go XR Fleet
Fleet booster with a rugged rooftop antenna for any fleet vehicle. Optional no-drill brackets fit pickups, SUVs, and trucks.
Specifications for the Fusion2Go XR Fleet
| Part Number: | SC-Fusion2GoXR-Fleet |
|---|---|
| Uplink Frequency Range (MHz): | 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 |
| Downlink Frequency Range (MHz): | 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 |
| Supported Standards: | 5G, 4G, LTE cellular standards |
| Cellular Bands: | 12 / 17 / 13 / 5 / 2 / 25 / 4 |
| Maximum Gain: | 50 dB |
| Input Impedance: | 50 Ω |
| Gain Adjustment: | 20 dB (Automatic) |
| Maximum Uplink Power: | 29.0 dBm |
| DC Power: | 6-15V |
| VSWR: | ≤2.0 |
| Noise Figure: | ≤ 6 dB |
| Exterior Antenna Cable / Length: | PRO200 / 15 ft |
| Interior Antenna Cable / Length: | 302 series / 10 ft |
| 12V Hardwire Power Supply Length: | 18 ft |
| RF Connectors: | FME Male (both ends) |
| Power Consumption: | ≤12W |
| Operation Temperature: | -4ºF to +158ºF |
| Dimensions: | 5.625" x 4" x 1.125" |
| Weight: | 1.43 lbs |
Fusion2Go XR OTR
Heavy-duty kit with an adjustable over-the-road antenna for semi-trucks and long-haul drivers.
Specifications for the Fusion2Go XR OTR
| Part Number: | SC-Fusion2GoXR-OTR |
|---|---|
| Uplink Frequency Range (MHz): | 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included) |
| Downlink Frequency Range (MHz): | 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included) |
| Supported Standards: | 5G, 4G, LTE cellular standards |
| Cellular Bands: | 12 / 17 / 13 / 5 / 2 / 25 / 4 |
| Input/Output Impedance: | 50 Ohm |
| Maximum Gain: | 50 dB |
| Max Uplink Power: | 29.0 dBm |
| Noise Figure: | ≤6 dB |
| VSWR: | ≤2.0 |
| Gain Adjustment: | 20 dB (Automatic) |
| DC Car Charger: | 6-15V |
| Maximum Output Power: | 1 Watt EIRP |
| RF Connectors: | FME Male (both ends) |
| Power Consumption: | ≤ 12W |
| Exterior Antenna Cable / Length: | RG-58 / 15 ft |
| Interior Antenna Cable /Length: | 302-series / 10 ft |
| DC Power Supply Cable Length: | 12 ft |
| Dimensions: | 5.625" x 4" x 1.125" |
| Weight: | 1.43 lbs |
| Operating Temperature: | -4º to +158º F |
Fleet models with permanent rooftop antennas may need professional installation.
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
- You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
- You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
- WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
- Please note, the four largest carriers - AT&T, T-Mobile, Verizon and Sprint - and more than 90 regional carriers have given blanket consent for use of all boosters certified to the new FCC standards.